Regulator - as fitted to the Chuntman and AT44

The regulator I went with was brought from Ebay from Rob Lane
I did a fair amount of research and this seemed like a good solution and a fair price as well - Also designed and made in the UK
the kits come with spare o rings and full instructions etc
You have to confirm the diameter you require when you order - so measure well !

I ended up contacting Rob - not a regulator problem but it seemed we had somethings in common, what a nice guy to deal with - reommended.

I don't have any pics of fitting the regs as I did not get round to taking any - Doh there is lots of information on Robs youtube channel

Video on the Reg here
Roberts Youtube Channel  here

With these regulators (like most) it is recommended to drill a to atmosphere hole so the regulator can work at it's most efficient
The chuntsman I bite the bullet so to speak and drilled the hole, I took some time in trying different pre chamber sizes before hand as once it is done it is done  !
The AT 44 I still have not drilled the chamber yet - I am happy with the way it is performing so may leave well alone
NOT HAVING THE HOLE DID EVENTUALLY CAUSE SOME ISSUES - TAKE ROB'S ADVICE AND DRILL THE HOLE - measure twice (or three times) drill once !!

Always takes some messing around to get things just rigt so be prepared to rebuild / strip a lot of times ! to save air I filled the chambers 3/4 with ball barings to reduce the amount of air needed - also sped things up a bit as well .

Airguns - Front page